RAM Upper-Air Series Fully enclosed 2 14" UVC Fan Assisted HO Lamps $895.00 Each 120V.
The RAM Upper-Air Series features dual lamp configurations with fan motors pulling the air through the stainless steel housing. This fixture is available in two high output lamp sizes (14” or 36”), with two voltage options (115 or 230VAC), allowing installation flexibility to accommodate virtually any room or building layout. RAM Series fixtures are also designed for easy access lamp changes (simply unlatch the cover). RAM Series lamps are rated for two-year continuous operational life with approximately 20% drop in UVC output at end of lamp life.
TB, RAM, CM and ICR Upper-Air Series in-room air treatment fixtures are designed specifically for continuous upper air UVC irradiation that helps decontaminate the environment around the patient. These trusted fixtures have been successfully used to control the spread of airborne microorganisms and bio-aerosols in hospitals, prisons, clinics and government buildings since 1960. The fixtures incorporate adjustable louvers that safely direct UVC energy above contact level (7+ feet) with occupants, ensuring TB/RAM/CM/ICR fixtures disinfect the air in occupied rooms.
Improves Indoor Air Quality (IAQ) by reducing bacteria, viruses and fungi, therefore minimizing the risk of cold, flu, allergies and other illnesses
- Two-year (17,000 hour) guarantee on lamps with only 20% decrease in output over the two years (9,000 hours on CM 15 lamps)
- Five-year, non-prorated warranty on the ballasts
- Continuously clean upper air in rooms, reducing airborne and/or bio-aerosol transmission of bacteria, viruses, and fungi
- Produce no ozone or other secondary contaminants.
UVC Germicidal Fixtures increase the value of all air conditioning and air-circulating systems by:
- Maximizing system efficiency
- Prolonging blower life
- Providing healthier air to breathe
Treating air that passes through an HVAC unit with ultraviolet light will reduce, or eliminate, DNA-based airborne contaminants (bacteria, viruses, mold spores, yeast, protozoa), and provide much healthier air to breathe. UVC Germicidal Fixtures are a labor-free solution that will not harm occupants, equipment or furnishings because they produce no ozone or secondary contaminants. For more than 70 years, tens of thousands have been safely installed in hospitals, clinics, processing plants, commercial offices, manufacturing sites and other commercial facilities and multi-and single-family residences around the world.
Basics of UVC
For HVAC applications, just as with all other UVC sterilization applications, direct exposure to 254nm UVC radiation, given appropriate exposure time, will inactivate the DNA and RNA of microorganisms (such as bacteria, viruses, mold spores, yeast, and protozoa), rendering them "sterile" (unable to reproduce), which, in biological terms, results in a "dead" microorganism.
An acceptable kill rate is determined by the total amount of UVC energy a microorganism "sees." This is a "dosage." Dosage is a product of the intensity of UVC radiation (expressed in microwatts per square centimeter) and exposure time to that radiation. You can find the necessary dosage for most common mold spores in the following table. Mold spores are generally much more difficult to kill than microorganisms and viruses and, thus, require a much higher dosage of ultraviolet light. The values shown under the percentage kill are in microwatts per square centimeter of UVC energy.
